OVERCOMING COMMON INSTALLATION CHALLENGES WITH BABY GATES
CRUCIAL INSTALLATION DISCLAIMER
These installations require a specific level of expertise; attempting this task without professional assistance may lead to safety risks and unexpected expenses.
By reading this article, you acknowledge that you have reviewed and accepted the terms and conditions specified here: Website Terms & Conditions.
The following examples illustrate common difficulties encountered during installations, which might align with your experience and offer practical solutions.
INSTALLATION ISSUE 1: UNEVEN SURFACES
ADDRESSING THE CHALLENGE OF UNEVEN SURFACES
-
- Measure the widest point at the top to determine the necessary size for the gate and any required extensions. (CLICK HERE FOR MEASURING GUIDELINES).
- Once you have the gates/extensions, use an angle grinder equipped with a metal/aluminium disc to cut the gate accurately, following the measurements indicated in the reference images above.
- Remove the plastic component from the section you plan to cut and insert it into the modified part of the gate to ensure the tension knob fits correctly.
- This process will be clearer once you have the gate available.
INSTALLATION ISSUE 2: MOUNTING ON AN ANGLED WALL
FINDING SOLUTIONS FOR MOUNTING ON AN ANGLED WALL
STEPS TO FOLLOW:
-
- Confirm that the gate/extensions are properly prepared for installation.
- Use Pratley Putty Quickset to fill any gaps and create a level surface on the wall.
- Allow the Putty to cure completely BEFORE tightening the tension knobs to securely attach the gate using pressure.
- Do not rely on the gate for safety until all installation steps are completed and the gate has been thoroughly tested for stability.
INSTALLATION ISSUE 3: INSTALLING BABY GATES OUTDOORS
NAVIGATING THE CHALLENGE OF INSTALLING BABY GATES OUTDOORS
While outdoor installations of baby gates may provide a quick and cost-effective solution, they could potentially void the warranty on the gates.
I recommend viewing outdoor installations of baby gates as a temporary and economical measure. This could risk voiding your warranty on the gates.
-
- Baby gates are specifically designed for indoor use and are unsuitable for outdoor applications due to potential exposure to harsh weather elements.
- This restriction is clearly outlined in the warranty documentation provided with the product.
- Failure to adhere to warranty guidelines will result in the loss of warranty coverage.
For a durable solution, consider hiring a contractor who specialises in security or latch gates. While this option may entail higher costs, it offers the most reliable outcome.
PREPARING THE BABY GATE AND EXTENSIONS FOR OUTDOOR USE:
Disclaimer: None of these methods guarantee complete rust protection; however, they aim to extend the lifespan of the gate in South African weather conditions.
Regular maintenance every 1-2 months can significantly lower the risk of rust.
To minimise rust and moisture accumulation, adhere to these guidelines:
-
- Before installation, treat the baby gate, extensions, and mounting kit, ensuring to cover the lower surface areas as well.
- Drill 8mm holes at the bottom of the gate using a steel drill bit. This will enable water drainage and prevent rust from developing inside the hollow gate, where moisture may gather at joints, connectors, and tension knobs. The holes will provide ventilation to avert moisture build-up.
- Apply a light coat of Rustoleum Painters Touch 2X Ultra Cover – Satin Clear 340g, available at takealot.com, to the baby gate, extensions, and mounting kit.
- Allow to dry thoroughly (approximately 2 hours), then apply a second coat.
For existing rust:
-
- Spray the affected areas with Rust-Oleum Rust Reformer 291g, following the product instructions.
- Check the product description on takealot.com; you may need to acquire mineral spirits to clean any overspray on non-rusted areas.
- The rust reformer will convert rust to a black colour, which should then be coated with Rust-Oleum Stops Rust Enamel Gloss White 340g, available on takealot.com.
The post Baby Gate Challenges and Hacks appeared first on Baby Proof SA.
The Article Baby Gate Hacks to Overcome Common Challenges Was Found On https://limitsofstrategy.com
The Article Baby Gate Hacks for Easy Solutions to Common Issues found first on https://electroquench.com
Post navigation
Previous Post
Iron Deficiency Blood Test: What to Expect in Bristol